Heat Pump Installation Cost - Real Local Prices, Then Your Exact Quote

Furnace & heating

AC repair

Heat pumps

Ductless mini splits

Carrier

Trane

Goodman

Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Explore

Styles & brands we work with

01AC repair02Furnace & heating03Heat pumps04Ductless mini splits05Carrier06Trane07Goodman

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Heat Pump Installation Cost in Henderson?

Our Heat Pump Installation services in Henderson typically run between $5,200 and $12,500 for a complete system, with most single-family homes landing in the $6,000 to $9,500 range depending on home size, efficiency rating, and ductwork condition. You’ll pay on the lower end for a straightforward swap of an existing heat pump in a smaller home, and on the higher end when the job includes new ductwork, electrical upgrades, or a high-efficiency cold-climate unit sized for a 2,400-plus square foot house. The price we put in writing before any work starts includes the equipment, labor, permits, refrigerant, and the full-year installation guarantee.

This guide breaks down exactly where your money goes, what drives the price up or down in the Henderson market, and how to avoid paying for things you don’t need. If you want a firm number for your specific house, call (775) 593-7060 and we’ll give you a written quote, free.

Before we get into the numbers, a quick note on what a heat pump actually is. A heat pump is a single system that both cools and heats your home. In summer it pulls heat from inside and dumps it outside, working like an air conditioner. In winter it reverses and pulls heat from the outdoor air and brings it inside, even when it’s cold out. That reversal is handled by a component called a reversing valve, which is what separates a heat pump from a standard AC. For Henderson’s climate, where winter lows rarely dip below freezing, a heat pump is often the most efficient way to handle both seasons with one piece of equipment.

Heat Pump Installation Cost Breakdown (2026)

Here’s what a complete heat pump installation in Henderson actually costs, line by line. These are the numbers we’ve seen across hundreds of installations in the valley, and they reflect 2026 pricing.

So what moves you from the $5,200 end of the range to the $12,500 end? Three things dominate: system capacity, efficiency rating, and whether your ductwork needs attention. A 2-ton unit for a 1,200-square-foot condo near Water Street costs far less than a 5-ton cold-climate unit for a 3,000-square-foot house in Anthem with a cracked supply plenum. Efficiency matters too. A 14.3 SEER2 entry-level heat pump costs less upfront than a 20 SEER2 variable-speed unit, but the variable-speed system will pull less electricity every month for the 10 to 15 years it runs. The trade-off is real money either way.

What Affects Heat Pump Installation Pricing in Henderson

• Home size and cooling load. Henderson summers push 110 degrees, so sizing matters. A Manual J load calculation, which measures square footage, window orientation, insulation, and ceiling height, determines the tonnage you need. Bigger house, bigger unit, bigger price. There is no universal “2,000 square feet equals X tons” rule, and any contractor who skips the calculation is guessing.
• Efficiency rating (SEER2). The higher the efficiency, the higher the equipment cost. An entry-level 14.3 SEER2 unit might run $3,200 while a 20 SEER2 unit from the same brand runs $6,000-plus. The payoff comes in summer, when your cooling bill in Henderson can hit $300 a month. A 20 SEER2 unit costs about 28 percent less to run than a 14.3 SEER2 unit under the same load.
• Ductwork condition. This is the biggest wild card in Henderson, especially in homes built before 1990. Ducts in attics here get baked, and we regularly open them up and find collapsed flex runs, disconnected fittings, and rodent damage. If your ducts leak 30 percent of your air into the attic, a new heat pump won’t fix your comfort or your bill. Repairs might run $800, full replacement $4,500.
• Electrical panel capacity. Older homes in Green Valley and older parts of downtown Henderson often have 100-amp panels. A heat pump needs a dedicated 240-volt circuit, and if the panel is full, you’re adding breakers or a subpanel. That’s the $150-to-$800 line item above, and sometimes it goes higher if a service upgrade is required.
• Brand and warranty. Entry-level Goodman and Rheem units cost less upfront and carry a 10-year parts warranty when registered. Carrier and Trane run higher on the front end but often hold their efficiency longer and carry longer compressor warranties. We install and service all nine major brands, including Lennox, York, Daikin, Bryant, and American Standard, so you’re not locked into one manufacturer.
• Installation complexity. A ground-level condenser on a flat pad behind a single-story house in Whitney Ranch is a straightforward job. A rooftop unit on a two-story home in MacDonald Highlands, or a tight side yard with an HOA setback requirement, adds crane time or fiddly maneuvering. That shows up in labor.

Heat Pump vs. Furnace + AC: Cost Reality Check

Henderson homeowners frequently ask whether they should go with a heat pump or a traditional split system: an air conditioner paired with a gas furnace. Here’s the honest math as of 2026.

Southwest Gas residential rates in Henderson have climbed steadily over the last three years, while NV Energy electric rates, though higher than the national average, have been more stable. A heat pump can deliver heat at roughly 300 percent efficiency, meaning for every dollar of electricity you put in, you get about three dollars of heat out. Even the best gas furnace runs at 96 percent efficiency, meaning you lose four cents of every dollar. For heating, the heat pump wins on operating cost in this climate. For equipment cost, a heat pump typically runs $500 to $1,500 more than comparable AC-only equipment, but you skip the furnace entirely, so the full system price often comes out close to even.

Where a furnace makes sense in Henderson is if you want gas heat for faster warm-up on the coldest mornings, or if your gas furnace is newer and you only need cooling. In that case, an AC installation for $3,500 to $7,500 may be the cheaper near-term move. Every house is different, and the right answer depends on your existing equipment and your long-term plan. We’ll tell you straight which one saves you more.

How to Save on Heat Pump Installation

Saving on a heat pump doesn’t mean buying the cheapest unit you can find. It means avoiding waste. Here’s what works.

1. Get the right size, not a bigger one. An oversized heat pump short-cycles, which is the HVAC term for turning on and off too frequently. That kills efficiency, wears out the compressor, and leaves humidity in the house. The right size is the one that matches a Manual J load calculation, not the one that sounds impressive. A 3-ton unit when you need a 2.5-ton unit costs more upfront and more every month.
2. Check your ductwork before you buy equipment. If your ducts leak 25 percent of your air, fixing them first might drop your load enough to let you buy a smaller, cheaper unit. Spending $1,200 on duct sealing can sometimes save $2,000 on equipment. That is the single most overlooked savings opportunity in Henderson.
3. Take advantage of utility rebates. NV Energy runs efficiency rebate programs that change annually. As of 2026, qualifying heat pump installations can earn rebates from a few hundred dollars up to $1,500 depending on the SEER2 rating and whether the system includes a smart thermostat. Ask us what’s active right now. We’ll handle the paperwork.
4. Replace in the shoulder season. October, November, February, and March are slower for HVAC companies in Henderson. You may get better scheduling flexibility and occasional manufacturer promotions during these months. Summer replacement means you’re competing with every other homeowner whose system just died.
5. Compare three written quotes. Not three phone estimates. Three written quotes, line by line, with the same efficiency rating and capacity specified. If one number is $2,000 lower, there’s a reason, and it’s usually a line item someone left out. The price should be in writing before any work starts. If a company won’t put it in writing, that’s your answer.

You can also just ask us for a free estimate. Call (775) 593-7060 and we’ll send a tech out to measure, inspect, and give you a written number. No pressure, no follow-up phone campaign.

What’s Included in a Dalton Heating & Air Heat Pump Installation

Every heat pump installation we do in Henderson includes the following, in writing, before any work starts.

• A full Manual J load calculation. We measure square footage, ceiling height, window size and orientation, insulation levels, and duct condition. We don’t guess at tonnage.
• Equipment matched to the load. New outdoor unit and indoor air handler, sized correctly and matched for efficiency ratings. We install all nine major residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
• New line set. We replace the copper refrigerant lines whenever the old ones are undersized, corroded, or the lengths are changing. Reusing an old line set on a new system is a shortcut we don’t take.
• Electrical disconnect and whip. New outdoor disconnect box and whip, on a dedicated circuit up to current code. If your panel needs work, we’ll tell you before we touch it.
• City of Henderson permit and inspection. We pull the permit, schedule the inspection, and stand for it. If the inspector flags something, we fix it.
• Startup and commissioning. We evacuate the lines, charge the refrigerant to the manufacturer’s specification, verify airflow, check the reversing valve operation in both modes, and test the defrost cycle.
• 365-Day Done Right Promise. If anything about the installation isn’t done right, we make it right for a full year, at no charge. That’s The Garrison Standard, and it’s been the operating rule at Dalton Heating & Air since 2003.

Heat Pump Installation Process: What to Expect

Here’s how a typical heat pump installation goes when you work with us. The whole process usually takes one full day, occasionally two for complex jobs with ductwork.

1. Free in-home estimate. A background-checked, uniformed technician arrives inside the scheduled window, measures your home, inspects the existing equipment and ductwork, and walks you through equipment options. You get a written quote before the tech leaves. Call (775) 593-7060 to schedule.
2. Equipment ordering and permit pull. We order the unit, schedule the install date, and pull the permit from the City of Henderson. Most equipment is in stock locally within three to five business days.
3. Installation day. The crew arrives in the morning, covers the work areas inside your home, removes the old equipment, and installs the new heat pump, air handler, line set, and electrical connections. Drop cloths go down before any equipment comes through the house.
4. Startup and testing. We evacuate and charge the system, run it in cooling and heating mode, verify refrigerant pressures and temperature splits, and confirm the reversing valve switches correctly. You’ll feel it blowing before we finish.
5. Walkthrough and cleanup. We show you the new thermostat, explain the settings, and walk the job with you. The site is left clean, old equipment is hauled away, and the permit is signed off by the City of Henderson.
6. Written guarantee. Your installation carries the 365-Day Done Right Promise in writing. If something fails in the first year because of our work, we return at no charge.

Brands We Install and Why the Price Differs

Dalton Heating & Air Henderson installs and services nine major residential HVAC brands. You are not locked into whatever a manufacturer is pushing this quarter. Here’s the landscape, in plain terms.

• Goodman and Rheem are typically the most affordable options. Solid, straightforward equipment with 10-year parts warranties when registered. You give up some efficiency features and noise reduction, but the equipment does the job for less money up front.
• Carrier, Trane, and Lennox sit in the premium tier. Higher equipment cost, quieter operation, and often better long-term efficiency retention. Trane’s Climatuff compressor reputation is earned, and you pay for it.
• York, Daikin, Bryant, and American Standard fill the middle and upper-middle range. Bryant is Carrier’s sister brand and shares a lot of engineering, often for less money. Daikin builds some of the most efficient ductless and multi-zone heat pumps available.

The brand affects the equipment line item, not the labor. A Goodman unit and a Carrier unit of the same capacity take the same crew roughly the same time to install. When you get three quotes, make sure the brands and efficiency ratings are comparable, or you’re comparing a Ford to a Lexus and calling it a price difference.

Henderson-Specific Installation Considerations

Henderson brings some specific conditions to the table that affect heat pump installation, and you should know about them before you sign anything.

Extreme summer heat. Henderson regularly hits 110-plus degrees in July and August. That means your heat pump’s outdoor unit is working against a 130-degree asphalt pad on the worst days. Proper clearance around the condenser, shading where possible without restricting airflow, and correct refrigerant charge all matter more here than in milder climates. We regularly see units in Green Valley and Whitney Ranch that were undercharged from a previous installation and have been running 15 percent inefficient for years.

Hard water and coil corrosion. Henderson water is hard, which doesn’t directly affect a heat pump, but the dust and alkaline soil do. Outdoor coils collect dust fast here, and that reduces heat transfer. The fix is an annual tune-up, which runs $80 to $200, and keeps your new unit running at spec. Skip it and you lose efficiency a little at a time.

HOA requirements. Some Henderson HOAs, particularly in MacDonald Highlands, Anthem, and Lake Las Vegas, have rules about where mechanical equipment can sit, what color it can be, and whether it needs screening. We’ve installed in all of them and know how to work with the architectural committees. It adds time and sometimes a few hundred dollars, and it’s better to know up front than to get a letter after the fact.

Building codes. The City of Henderson requires a permit for heat pump replacement or new installation, and the job must pass inspection. We handle the permit and the inspection on every job. The 2026 code cycle also requires new installations to meet current energy efficiency minimums, which means the bottom-of-the-barrel units have effectively been regulated out. That is a good thing for your electric bill.

Repair vs. Replace: When Does a New Heat Pump Make Sense?

If your existing heat pump is struggling, you’re probably weighing a repair against a replacement. Here’s how to think about it.

As a rule, if the repair costs less than half the price of a new system and your heat pump is under 10 years old, a repair usually makes sense. Heat pump repair in Henderson typically runs $150 to $650 depending on the part, though a compressor replacement is a different animal and can hit $2,000-plus. If your unit is over 12 years old and the quote comes in at $2,500 or more, you’re usually better putting that money into a new system.

The exceptions are refrigerant leaks. Older heat pumps run on R-410A, which is being phased down under federal rules and carries a rising price tag. If your system has a major leak, you might be looking at $1,000-plus just to recharge it after the leak is fixed, and another leak could hit next season. In that case, replacement starts looking smarter sooner.

We’ll give you the repair number and the replacement number side by side, and let you decide. The repair number includes a written guarantee for a full year. The replacement number includes a written guarantee for a full year too. Either way, the price is in writing before any work starts.

How Much Does a Heat Pump Cost to Run in Henderson?

Installation cost is only half the story. The operating cost matters more over 15 years than the equipment price tag does on day one.

A properly sized, 16 SEER2 heat pump in a 1,800-square-foot Henderson home will add roughly $140 to $220 a month to the electric bill in peak summer and about $60 to $110 in the winter shoulder months. That’s a wide range because NV Energy rates shift seasonally and home insulation varies wildly. A 20 SEER2 variable-speed unit knocks maybe 25 percent off the summer number. A 14.3 SEER2 entry-level unit runs a little higher. Over 12 years, the difference between a 14.3 and a 20 SEER2 unit in Henderson can exceed $3,000 in saved electricity, which usually pays for the upgrade twice over.

Annual maintenance matters here too. A tune-up runs $80 to $200 and catches small problems, like a dirty coil or a low refrigerant charge, before they become $600 repairs. Skipping maintenance on a heat pump is a reliable way to spend more money every year and shorten the equipment’s life.

FAQs – Heat Pump Installation Cost

How much does a heat pump cost for a 2,000 square foot house in Henderson?

For a typical 2,000-square-foot Henderson home, a complete heat pump installation runs $6,500 to $10,500, including equipment, labor, permits, and startup. The spread depends on the efficiency rating, whether ductwork needs repair, and which brand you choose. A mid-efficiency 16 SEER2 system in a home with decent ducts lands around $7,500 to $8,500. Call (775) 593-7060 for a written quote specific to your house, free.

Is it cheaper to repair or replace a heat pump?

If your heat pump is under 10 years old and the repair is under $1,000, repair usually wins. Our heat pump repairs run $150 to $650 for most issues, and every repair carries our written one-year guarantee. If the unit is over 12 years old and the repair quote hits $2,000 or more, replacement starts making more sense, especially with 2026 electricity rates in Henderson. We’ll give you both numbers and let you decide.

Can you install a heat pump in a Henderson home with no existing ductwork?

Yes, and it happens in a lot of Henderson homes. If you have no ducts, the options are a ductless mini-split heat pump, which handles one to five zones and typically runs $7,000 to $14,000 depending on the number of indoor heads, or a full ducted system, which adds $4,000 to $8,000 to the base installation cost for duct fabrication and installation. Ductless systems are common in older Henderson homes and additions that were built without central ductwork.

How long does a heat pump installation take?

A straightforward heat pump replacement in Henderson takes one full working day, usually six to eight hours. Jobs that include ductwork replacement, electrical panel upgrades, or crane work can stretch to two days. We’ll give you a timeline in writing when we quote the job, and the crew arrives inside the window we state.

What should I look for in a Henderson heat pump installer?

Three things: written pricing before work starts, a written guarantee on the installation, and proof that the company pulls a permit. The City of Henderson requires a permit on every heat pump installation, and any company that skips it is cutting corners and putting you on the hook. At Dalton Heating & Air, the price is in writing before any work begins, the installation is covered by our 365-Day Done Right Promise, and the permit is pulled and inspected on every job. That’s been the standard since 2003, and it’s non-negotiable.

Get a Written Heat Pump Installation Quote in Henderson

You should know exactly what a heat pump will cost in your house before you commit to anything. Call (775) 593-7060 and we’ll schedule a free in-home estimate. A background-checked, uniformed technician will measure your home, inspect your ductwork and electrical panel, and hand you a written quote. The price on that paper is the price you pay. No surprises at the door, no add-ons at the end.

Dalton Heating & Air Henderson has been serving this valley since 2003 as a Garrison Partners company, and every job we do is held to The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. If it’s not done right, we make it right. That’s the whole deal.

If you’re comparing options, start with our home page to see what we do, or go straight to the Heat Pump Installation in Henderson page for more detail on the systems we install and the process. Then pick up the phone. Marco Benitez and the team will take it from there.

Pricing reflects the Henderson market as of 2026. Dalton Heating & Air Henderson offers free estimates – call (775) 593-7060.

Written by Marco Benitez, Owner at Dalton Heating & Air Henderson, serving Henderson since 2003.