Furnace Replacement in Henderson, NV

Furnace Replacement in Henderson, NV

Furnace replacement in Henderson typically costs between $3,800 and $7,200 installed, depending on furnace size, efficiency rating, and whether any ductwork needs modification. Most replacements take one full day from start to finish. Dalton Heating & Air Henderson, led by Marco Benitez, handles the entire job: load calculation, removal of the old unit, installation, and a written guarantee on the workmanship.

This page covers what a Heating & Furnace replacement actually involves, when it makes sense to replace rather than repair, what we charge, and how the process works from the first call to the final walkthrough. If you’re weighing repair versus replacement, call us at (775) 593-7060 and we’ll give you an honest read on what your existing furnace is worth putting money into.

Key Takeaways

• Furnace replacement in Henderson runs $3,800 – $7,200 for most homes.
• We put the price in writing before any work starts, no exceptions.
• Every replacement comes with a 365-Day Done Right Promise in writing.
• We install and service Carrier, Trane, Lennox, and Goodman equipment.
• Same-day and next-day estimates are available. Calls are answered by a live person 24/7.

When You Need Furnace Replacement

Henderson’s winter nights drop into the 30s from December through February, but the bigger strain on furnaces here is the shoulder season. Units in Henderson cycle on and off through fall and spring more often than furnaces in colder climates, where they run steady for months. That cycling wears out igniters, heat exchangers, and blower motors faster than most homeowners expect.

Here are the situations where replacement is the smarter spend, not just a bigger one:

• Heat exchanger crack or failure. This is the one item where we will not patch and send you on your way. A cracked heat exchanger can leak carbon monoxide into the living space. If your furnace is 15-plus years old and the heat exchanger has failed, replacement is almost always the right call.
• Furnace age of 15 years or more, with a major repair quote. If you’re looking at $800 – $1,200 to replace an inducer motor or blower on a furnace that’s nearing the end of its design life, that money is usually better spent on a new unit with a full warranty.
• Rising gas bills without a clear cause. Furnaces lose efficiency as they age. A 20-year-old unit may be running at 60 – 70% efficiency even if it was rated 80% when new. That difference shows up on your Southwest Gas bill every winter.
• Uneven heating across rooms. In older Henderson ranch homes, cold spots often point to a furnace that can no longer move air the way it used to, or ductwork that was undersized from the start. Replacement gives us a chance to get the airflow right.
• Frequent repairs in the last two years. Two or three service calls in a single season is a pattern. In Green Valley Ranch and Anthem, where many homes are hitting the 15 – 20 year mark on original equipment, we see this constantly.
• The furnace is physically rusted, corroded, or leaking. Water pooling around the base of a furnace, rust on the cabinet, or visible corrosion on the burner assembly are signs the unit is at end of life.

Gas furnaces are serious equipment. If you smell gas, leave the house and call Southwest Gas first, then call us once the situation is safe. If you suspect a cracked heat exchanger, shut the furnace off and have it inspected before running it again. These are not DIY diagnosis situations.

Our Furnace Replacement Process

We run every replacement the same way, whether it’s a straightforward swap in a Whitney Ranch tract home or a full system replacement in a custom build in MacDonald Highlands. The process below is what you can expect from the first call to the final walkthrough.

1. Call and scheduling. You call (775) 593-7060. A live person answers, not a voicemail queue. We schedule a time window that works for you, and we arrive inside that window.
2. In-home load calculation and estimate. We don’t guess at furnace size. Marco Benitez or one of our background-checked technicians measures the home, checks insulation levels, window exposure, and duct layout. Then we run a Manual J load calculation to determine the correct furnace size for your specific house, not a rule-of-thumb guess.
3. Written price, no exceptions. Before any work begins, you get a written estimate that itemizes the furnace, any ductwork modifications, permits if required by the City of Henderson, and labor. That price does not change at the door. If we find something unexpected during the install, we stop, explain it, and get your approval in writing before proceeding.
4. Installation day. We remove the old furnace, set the new one, connect gas lines, run or replace the venting as needed, and wire the thermostat. Our technicians wear uniforms, are background-checked, and lay down floor protection before bringing equipment in. The worksite is cleaned before we leave.
5. Startup, testing, and walkthrough. We fire the furnace, verify gas pressure, check temperature rise across the heat exchanger, and test carbon monoxide levels. Then we walk you through the new thermostat, the filter location, and what the warranty covers. You get the 365-Day Done Right Promise in writing before we leave.

Furnace Replacement Pricing in Henderson

Furnace replacement in Henderson typically runs $3,800 to $7,200 for a standard 60,000 – 100,000 BTU furnace installed. That includes the furnace itself, removal and disposal of the old unit, connection to existing gas and electrical lines, startup testing, and our written workmanship guarantee. Here’s how the price breaks down:

Furnace Type	Efficiency (AFUE)	Typical Installed Cost in Henderson
Single-stage, 80% AFUE	80%	$3,800 – $4,600
Single-stage, 95%+ AFUE	95 – 96%	$4,600 – $5,500
Two-stage, 96% AFUE	96%	$5,200 – $6,400
Modulating, 97%+ AFUE	97 – 98%	$6,000 – $7,200

What moves the price:

• Furnace size. Henderson homes range from 1,200-square-foot townhomes to 4,000-plus-square-foot houses. A 60,000 BTU furnace costs less than a 100,000 BTU unit, but the difference is smaller than most people expect: the labor and materials are similar. The load calculation determines what you actually need.
• Efficiency rating. The AFUE number tells you what percentage of the fuel becomes usable heat. An 80% furnace sends 20 cents of every gas dollar up the flue. A 96% unit wastes 4 cents. Higher efficiency costs more up front and saves every winter after.
• Brand and equipment line. We install Carrier, Trane, Lennox, and Goodman equipment. Within each brand, base models cost less than top-tier lines. We’ll show you the difference in real terms: warranty length, noise level, and long-term parts availability.
• Ductwork condition. If your existing ductwork is undersized, leaking, or damaged, we may recommend repairs or modification. That is quoted separately and in writing, and we’ll explain why it matters before asking you to spend on it.
• Permits. The City of Henderson requires a mechanical permit for furnace replacement. The permit cost is included in the written estimate, not tacked on at the end.

Every estimate is free. Call (775) 593-7060 and we’ll schedule a time to measure your home and give you a written price. No pressure, no same-day discount games. The price you see on the estimate is the price you pay.

Furnace Brands We Install

Dalton Heating & Air Henderson is factory-trained to install and service equipment from all nine major residential HVAC brands. For furnace replacement specifically, we install more Carrier, Trane, Lennox, and Goodman units than anything else in the Henderson market. Each has a different strength:

• Carrier and Trane tend to cost more up front and carry longer warranties on the heat exchanger. We recommend these when homeowners plan to stay in the home for 10-plus years.
• Lennox offers a strong mid-range option with good efficiency numbers at a reasonable price point.
• Goodman is the straightforward value pick: solid build quality, good parts availability, and a lower installed price. If the home is a rental or a short-term hold, Goodman is often the right call.

We do not push one brand across every job. The right furnace depends on the home’s size, your budget, and your long-term plans for the property. We’ll show you real numbers for each option and let you decide.

Why Henderson Homeowners Replace With Dalton

Dalton Heating & Air Henderson operates under The Garrison Standard, the operating discipline set by Garrison Partners in 2003. It’s not a marketing phrase. It’s a specific set of rules every job follows:

• Written price before any work begins. Always. The Garrison Code requires it. If a technician shows up and starts work before handing you a written price, that’s a violation of our own standard.
• Written guarantee on every replacement. Not a verbal promise. A written guarantee that covers the workmanship for a full year. If something we did fails in that time, we come back and fix it at no charge.
• 365-Day Done Right Promise. If it’s not done right, we make it right. That’s the full year of coverage, not a 30-day window.
• Live phone answer, 24/7. No voicemail queue, no callback window. A real person picks up the phone whenever you call.
• Background-checked, uniformed technicians. You know who is coming before they arrive. Every technician at Dalton Heating & Air Henderson has passed a background check and wears a uniform with a company ID.

Marco Benitez runs the Henderson operation. He has built the team on one rule: show up inside the window, price in writing, do the job by the book, leave the site clean, and stand behind the work for a full year. That’s The Garrison Code in plain terms.

FAQs – Furnace Replacement

How much does furnace replacement cost in Henderson, NV?

Furnace replacement in Henderson typically costs $3,800 to $7,200 installed, depending on furnace size, AFUE efficiency rating, brand, and whether ductwork needs modification. The furnace itself accounts for roughly half the total; labor, permits, sheet metal, venting, and the written guarantee account for the rest. Call (775) 593-7060 for a free in-home estimate with a written price.

Is it cheaper to repair or replace a furnace in Henderson?

If your furnace is under 12 years old and the repair is under $500, repair usually makes sense. If the unit is 15 years old or older and the repair is $800 or more, replacement is almost always the better long-term spend. A good rule: multiply the repair cost by the furnace’s age. If that number exceeds $5,000, replace. Call us at (775) 593-7060 and we’ll give you an honest read on your specific unit.

How long does furnace replacement take?

A standard furnace replacement in Henderson takes one full day, typically 6 to 8 hours. If ductwork modification is needed, the job may extend to a second day. We’ll tell you the expected timeline in the written estimate before work begins.

Do you replace furnaces same-day or on weekends?

In most cases, we can schedule replacement within 24 to 48 hours of the estimate, and we do perform weekend installations when the schedule allows. If your furnace has failed completely during a cold snap, call (775) 593-7060 and we’ll do everything we can to get a working furnace in place as fast as possible.

What size furnace do I need for my Henderson home?

The correct furnace size depends on square footage, ceiling height, insulation level, window type and orientation, and the home’s air leakage rate. We run a Manual J load calculation on every replacement, which is the industry-standard method for determining furnace sizing. Rule-of-thumb guesses like “1,000 BTU per square foot” produce oversized furnaces that short-cycle and waste gas. The load calculation gets it right.

Will a new furnace work with my existing thermostat and ductwork?

In most Henderson homes, yes. Existing ductwork can usually be reused if it’s in good condition and properly sized. The thermostat may need an upgrade if you’re moving from a single-stage to a two-stage or modulating furnace, since those require different wiring. We’ll include any thermostat work in the written estimate.

Ready to Replace Your Furnace?

If your furnace is over 15 years old, has needed multiple repairs, or has a failed heat exchanger, replacement is the right conversation to have now. Call (775) 593-7060 for a free estimate. We’ll measure the home, run the load calculation, and give you a written price for the furnace that fits your house and your budget. The price does not change at the door, the guarantee is in writing, and the work is done by a background-checked crew that shows up inside the window.

Written by Marco Benitez, Owner at Dalton Heating & Air Henderson, serving Henderson.