Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Henderson, NV
Furnace repair in Henderson typically costs $150 to $450 for most fixes, and it’s usually done in a single visit when the right part is on the truck. At Dalton Heating & Air Henderson, you’ll get that price in writing before any work starts, a written guarantee covering the repair for a full year, and a technician who shows up inside the window we give you. Call (775) 593-7060 to get a furnace tech dispatched, and see how we work under The Garrison Standard.
This page covers what actually goes wrong with furnaces in Henderson, what repairs cost, and how our process works from your first call to the final walkthrough. If you’re also weighing whether to fix or replace the whole system, our Heating & Furnace in Henderson guide walks through that decision in plain terms.
When You Need Furnace Repair
Most furnace failures give you warning signs before the house goes cold. Henderson’s dry desert air and hard water change how some parts wear, and specific symptoms point to specific fixes. Here are the call drivers we see most often:
- The furnace fires up but the blower doesn’t push air. That usually means a failed blower motor or capacitor. In Henderson’s dusty conditions, capacitors degrade faster than the manufacturer expected.
- The furnace short cycles, on for 3 to 4 minutes, off, back on. A dirty flame sensor is the most common culprit in the newer Green Valley Ranch and Inspirada homes. It’s a $120 to $180 fix, not a replacement situation.
- Cold air comes out of the vents. We check the igniter first. Hot surface igniters on Carrier and Lennox units installed in the last 10 years tend to crack after 6 to 8 seasons of Henderson temperature swings.
- You smell gas when the furnace kicks on. Shut the system off, open windows, and step outside while you call. This is one we treat as an emergency every time.
- Thumping, rattling, or a high-pitched squeal. A thump on startup points at a heat exchanger strain. A squeal that rises and falls with the fan points at the blower bearings.
- The furnace works fine, but the gas bill jumped 25% or more last winter. That’s a leak in the ductwork or a burner burning rich. In older Anthem and Whitney Ranch homes with original duct runs, we find disconnected joints often.
If any of this sounds familiar, call (775) 593-7060. We answer live, 24/7. No voicemail queue, no answering service that promises a callback.
Our Furnace Repair Process
You should know who is coming to your door and what they are going to do before you ever let them in. Here is exactly how a Dalton Heating & Air Henderson furnace repair runs:
- You call (775) 593-7060 and describe the symptom. A live person picks up, takes the details, and sets a 2-hour arrival window that fits your schedule. You’ll get the technician’s name before they pull up.
- The tech arrives, introduces themselves, and puts on shoe covers. Every Dalton technician is background-checked, uniformed, and works out of a stocked truck. We carry parts for all nine major residential brands we service, so many repairs finish on the first visit.
- We diagnose the furnace and walk you through the findings. We show you the failed part, explain what it does in plain language, and tell you why it failed. No pressure, no jargon. You decide what happens next.
- You get a written price before we touch a wrench. The price on the quote is the price you pay. Every job, no exceptions. That’s The Garrison Code rule we’ve kept since 2003.
- We complete the repair and test the system through a full cycle. The furnace runs, the burners fire, the blower pushes air, the thermostat satisfies. We check carbon monoxide levels as part of the standard repair.
- We leave the site clean and put the guarantee in your hand. Every repair carries a written full-year guarantee. If that same repair fails inside 365 days, we come back at no charge. That’s the 365-Day Done Right Promise.
That process is the same whether we’re changing a Goodman igniter in a Water Street District rental or rebuilding a Trane gas valve in a MacDonald Highlands home.
Furnace Repair Pricing in Henderson
Most furnace repairs in Henderson run between $150 and $450, depending on the part. Here is what common repairs cost in this market, based on what we see in the field:
| Repair | Typical Cost in Henderson |
|---|---|
| Flame sensor cleaning or replacement | $120 – $180 |
| Igniter replacement | $190 – $275 |
| Capacitor replacement | $160 – $240 |
| Pressure switch replacement | $180 – $260 |
| Gas valve replacement | $350 – $600 |
| Blower motor replacement | $400 – $750 |
| Heat exchanger replacement | $1,100 – $1,800 |
These ranges include the part, the labor, and the full-year written guarantee. No diagnostic fee surprises, no “while I’m here” upsell list. The price you sign off on is the price on your invoice.
What moves the number? Three things. The age of your furnace and whether the part is still in production. The brand, because a Carrier inducer assembly costs more than a Goodman equivalent. And the access, because some Henderson builders put furnaces in closets that were not designed for a human being to work in.
Call (775) 593-7060 for an exact quote. The phone estimate is free, and the on-site diagnostic is straightforward: we tell you what’s wrong, what it costs to fix, and you decide, with the price already in writing.
FAQs – Furnace Repair
How much does furnace repair cost in Henderson?
Most Henderson furnace repairs cost between $150 and $450. Simple fixes like a flame sensor or capacitor run under $250. Bigger jobs like a blower motor or gas valve land in the $350 to $750 range. Call (775) 593-7060 and describe the symptom, and we’ll give you a tighter range before the tech even arrives.
Can you fix my furnace the same day?
In most cases, yes. Our trucks are stocked with common parts for all nine brands we service, including Carrier, Trane, Lennox, and Goodman, so a single-visit repair is the norm, not the exception. If the part is unusual and has to be ordered, we tell you that before you spend a dollar.
Is it cheaper to repair or just replace the furnace?
Repair is almost always cheaper upfront, and if your furnace is under 12 years old, a repair that keeps it running is usually the right move. The replacement conversation starts when the heat exchanger has failed, or when the repair cost tops 50% of the system’s remaining value. We’ll give you both numbers and let you make the call, though if heat exchanger failure is the issue, a replacement is typically the safer long-term play. Our Heating & Furnace page covers the decision in more detail.
Do you work on older furnaces?
Yes. We repair furnaces of all ages, including 20-plus-year-old systems common in established Henderson neighborhoods like Green Valley and Whitney Ranch. Parts for old Rheem, York, and Lennox units are sometimes harder to source, but we’ll tell you upfront if the part availability is going to extend the repair timeline.
Do you charge a diagnostic fee?
We charge a flat diagnostic fee that covers the full system check and the written quote. That fee is disclosed when you call, before the truck rolls to your door. If you approve the repair, the diagnostic fee is rolled into the job. No bait-and-switch at the doorstep. Call (775) 593-7060 for the current rate.
Why is my furnace blowing cold air in Henderson?
In Henderson, a furnace blowing cold air is usually a failed igniter or flame sensor, not a refrigerant issue. When the burners can’t light, the blower still runs, and you feel cold air. A cracked igniter on a Carrier or Lennox unit is the first thing our techs check in newer Henderson homes. It’s a straightforward repair that costs $190 to $275 in most cases.
Call (775) 593-7060 now for a free estimate. We’ll have the tech on the way, with the price in writing before work starts and a full-year guarantee on whatever we fix.
Written by Marco Benitez, Owner at Dalton Heating & Air Henderson, serving Henderson.